The cutting accuracy of a PCB router machine depends on the specific machine and configuration. For example, the SEPRAYS GAM336AT offers a cutting accuracy of ±0.05 mm and repeat accuracy of ±0.01 mm.
The following sections explain what cutting accuracy means, what affects it, how to judge whether it is sufficient, and how to verify it through actual sample cutting.
1. What Does Cutting Accuracy Mean in a PCB Router Machine?
Three accuracy-related factors are usually important in PCB router depaneling:
Cutting Accuracy → Repeat Accuracy → Positioning Accuracy
Cutting accuracy refers to the deviation between the programmed cutting path and the actual cutting path. Repeat accuracy describes how consistently the machine can reproduce the same cutting result. Positioning accuracy refers to the machine’s ability to identify the actual PCB position and compensate for positional deviation.

Stable cutting performance depends on all three factors working together.
2. What Factors Affect PCB Router Machine Cutting Accuracy?
The actual cutting accuracy of a PCB router machine depends on the complete motion, positioning, fixing, and cutting system.
| Factor | Effect on Cutting Accuracy |
|---|---|
| Machine Structure & Servo System | Affects motion stability and position control |
| CCD Vision Positioning | Detects PCB position and compensates for loading or placement deviation |
| PCB Fixing Method | Unstable fixing may allow the PCB to move during cutting |
| Router Bit Condition | Tool wear can affect cutting position, edge quality, and consistency |
| Spindle Condition | Stable spindle operation helps maintain consistent cutting performance |
| Cutting Parameters | Cutting speed, feed method, and other settings influence the final result |
Stable cutting accuracy comes from the coordination of the entire system rather than from a single specification.
3. How Do You Know Whether the Accuracy Is Enough for Your PCBA?
Different PCBAs require different levels of cutting accuracy. The key is to evaluate the available cutting margin and product tolerance.
If components are close to the cutting line, the PCB is small, or the routing gap is narrow, cutting accuracy, repeat accuracy, and CCD positioning become more important. If the available cutting margin is larger, the tolerance requirement may be more flexible.
Component Clearance → Routing Margin → Product Tolerance → Machine Accuracy → Sample Test
The goal is not to choose the highest possible accuracy, but to make sure the machine accuracy is sufficient for the actual PCBA.
4. GAM336AT Cutting Accuracy Reference
GAM336AT Inline PCB Router Machine
The SEPRAYS GAM336AT can be used as a practical reference for PCB router machine accuracy:
- Cutting accuracy: ±0.05 mm
- Repeat accuracy: ±0.01 mm
- CCD vision positioning
- AC servo control
- Supports straight, L-shaped, U-shaped, circular, and arc cutting paths
- Inline automated production for production-line integration
Cutting accuracy reflects how closely the actual routing path follows the programmed path, while repeat accuracy indicates consistency across repeated cutting cycles. CCD positioning helps detect the actual PCB position and compensate for positional deviation.

These specifications provide a useful reference, but the final machine selection should still be based on the actual PCBA structure, routing margin, and tolerance requirements.
5. How Can You Verify Cutting Accuracy with Sample Testing?
Machine specifications are useful for initial evaluation, but actual PCBA sample cutting is recommended before machine purchase or mass production.
- Cutting Position: Confirm that the actual routing path matches the programmed position.
- Component Clearance: Check whether enough clearance remains between the cutting edge and nearby components.
- Edge Quality: Inspect for burrs, chipping, or abnormal edges.
- Repeat Consistency: Cut multiple identical PCBAs and compare the cutting positions.
- Continuous Production Stability: Confirm that accuracy remains stable during repeated operation.
For PCBAs with narrow routing margins or higher accuracy requirements, actual sample testing is more reliable than comparing specification-sheet numbers alone.
6. Conclusion
PCB router machine accuracy should be evaluated through cutting accuracy, repeat accuracy, and positioning capability, together with PCB fixing, tool condition, and cutting parameters.
The right accuracy is not simply the highest number on a specification sheet. It is the level of accuracy that safely meets the PCBA tolerance, routing margin, component clearance, and production consistency requirements.
If you are unsure what cutting accuracy your PCBA requires, send SEPRAYS your Gerber or DXF files, PCBA dimensions, routing path, component clearance, and tolerance requirements. We can evaluate the process and perform sample cutting before machine selection.
Email: millie@seprays.com
WhatsApp: +86 139 2552 7370


