Search component
PCB/FPC Laser Machine
ZM30 Moving Blade V-groove Depaneling Machine

Product Features

The ZM30 is a moving blade V-groove PCB/PCBA depaneling machine for straight separation of pre-scored panels, designed to replace manual board breaking with a more controlled mechanical cutting process.

  • Foot Pedal Operation: Starts the cutting cycle by foot pedal, allowing the operator to keep both hands focused on PCB positioning and handling.
  • High / Low Speed Selection: Switch between high and low operating speeds to match different PCB conditions and production requirements.
  • Fine Blade Height Adjustment: The upper circular blade height can be finely adjusted to accommodate different PCB thicknesses and V-groove depths.

Send us your PCB dimensions, board thickness, V-groove position and production requirements to select the right ZM30 configuration.

Get A Quote
Details

Product Details

    Overview

    The ZM30 uses an upper circular blade and lower linear blade configuration. The PCB/PCBA panel is positioned on the lower blade, while the upper circular blade travels horizontally along the cutting line to separate the panel.

    The machine includes mechanical adjustment mechanisms for board positioning and cutting setup, making it suitable for different PCB dimensions and production conditions.

    Core Advantages

    ZM30 low-stress V-groove PCB depaneling cutting result

    Low-Stress Depaneling, Less Board Damage

    Mechanical blade cutting reduces the stress generated by manually breaking PCB panels, helping reduce solder-joint cracking, component damage and uneven break edges.

    The cutting process produces a flatter, cleaner separation edge with less burr formation.

    Preset Blade Travel Positions

    The blade travel distance can be preset according to the PCB length, so the cutting head does not need to complete the full machine stroke for shorter boards.

    Different ZM30 models provide different preset stopping positions, helping shorten unnecessary blade travel during repetitive production.

    ZM30 preset blade travel position controls
    ZM30 PCB depaneling machine safety light curtain and blade guard

    Multiple Safety Protections

    The upper circular blade is equipped with a blade guard to reduce accidental contact with the cutting area.

    A safety light curtain / photoelectric protection system is also used around the blade movement zone. If a hand enters the protected area during operation, the machine can stop to improve operator safety.

     

    Application

    The ZM30 is suitable for separating a variety of V-groove PCB and PCBA panels, including PCBA panels, SMT circuit boards, aluminum-based PCBs, LED circuit boards and LED strips.

    It can be used in LED, SMT, consumer electronics, electric toy and other electronics manufacturing applications where straight-line PCB depaneling is required.

    Machine selection should be based on actual PCB length, board thickness, V-groove position and production requirements.

    ZM30 Moving Blade Depaneling Machine Application Areas

    ZM30 Moving Blade V-Groove Depaneling Machine FAQ

    1. Can the ZM30 blade be resharpened after it becomes dull?

    Yes. The blade can be resharpened when it becomes dull. Depending on the actual blade condition, it can typically be reground around 7–10 times.

    2. What happens if the machine does not reach the preset travel position in continuous foot-pedal mode?

    The indicator light flashes as an alarm. The alarm must be cleared before operation continues.

    3. Can the ZM30 cut PCBs without a standard V-CUT groove?

    The rear cutting-length stop can be adjusted for different PCB widths, allowing the machine to support relevant PCB cutting applications without a standard V-CUT groove. Actual suitability should be confirmed according to the board structure and cutting position.

    4. Can the worktable height be adjusted?

    Yes. The worktable can be adjusted vertically to help match different PCB thicknesses and cutting positions.

    5. How do I choose between ZM30-400, ZM30-600, ZM30-900 and ZM30-1200?

    The main selection factor is the required blade travel distance and PCB length. Choose a model whose available travel range covers your product size.

    6. What information should I provide when requesting a quotation?

    Please provide your PCB drawing or photo, board length, board thickness, V-groove location, expected output and production requirements.

    Why Choose SEPRAYS?

    From daily operation to overseas support, SEPRAYS provides practical technical services to help customers use and maintain their PCB depaneling equipment more efficiently.

    SEPRAYS operation and maintenance training

    Operation and Maintenance Training

    Helps production teams master machine operation to improve efficiency

    SEPRAYS remote technical support

    Remote Technical Support

    Provides efficient technical coordination and problem-solving capabilities

    SEPRAYS 24/7 service support

    24/7 Service

    SEPRAYS 24/7 service support ensures rapid response to requests

    SEPRAYS regular overseas technical visits

    Regular Overseas Visits

    Regular overseas visits to facilitate face-to-face technical exchanges

    Contact SEPRAYS

    Looking for a moving blade V-groove PCB depaneling machine for PCBA, LED boards, SMT boards or aluminum-based PCBs?

    Send us your PCB drawing, board length, board thickness, V-groove position and production requirements, and SEPRAYS will help you select the appropriate ZM30 configuration.

    E-Mail:
    millie@seprays.com

    Address:
    5th Floor, B2 Building Research Center Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, Guangdong Province, China


    Request a Quote · Get Product Specifications · Discuss Your PCB Depaneling Project

Parameter

Parameter

    Technical Specifications

    • Parameters
      ZM30
    • Maximum Depaneling Length
      400 mm(ZM30-400)
    • Cutting Thickness
      0.2–3.2 mm
    • Feeding Speed
      300–500 mm/s
    • Blade Material
      SKH7 HSS
    • Blade Tooling Precision
      ±0.1 mm
    • Blade Tooling Life
      More than 500,000 cycles
    • Working Temperature
      10–35°C
    • Storage Temperature
      -20–50°C
    • Power Supply
      220V / 50Hz / 250W
    • Machine Weight
      52 kg
    • Machine Dimensions
      740 × 500 × 450 mm
    Note: Products are subject to continuous optimization; specifications may be adjusted without prior notice. And we support customized requirements.

    ZM30 Model Differences

    Different ZM30 models provide different preset blade travel positions to match different PCB lengths.

    • Model
      Preset Blade Travel Positions
    • ZM30-400
      0 / 100 / 200 / 300 / 400 mm
    • ZM30-600
      0 / 150 / 300 / 450 / 600 mm
    • ZM30-900
      0 / 200 / 400 / 600 / 900 mm
    • ZM30-1200
      0 / 300 / 600 / 900 / 1200 mm
    Note: Products are subject to continuous optimization; specifications may be adjusted without prior notice. And we support customized requirements.

What services do you provide?

    What services do you provide?

    We provide one-stop automated PCB depaneling solutions: laser, routing, punching and V-CUT.

    Can your machines handle different thicknesses of PCBs?

    Yes, our machines are designed to handle various PCB thicknesses. We can provide customization and options to ensure smooth processing of both rigid and flex boards.

    What type of training do you provide for your machines?

    We provide comprehensive on-site training, covering machine operation, maintenance, and troubleshooting. We also offer ongoing technical support via phone and email.

    What after-sales services can you provide?

    ●Exclusive service:

    We will give users feedback within 10 minutes on any problems they encounter when using the device and establish a 1V1 exclusive after-sales service group for users.

    ●Remote service:

    Provide users with a 7*24H hotline based on feedback on fault information, analyze, locate, and solve the fault through remote telephone support,remote login, and other methods.

    ●On-site service:

    Arrive at the work site within 8 hours and solve the problem within 1 working day. 2-4 days of training on equipment safety operation and application.Any breach of contract will be handled by the contract provisions.

    ●Service locations:

    We have sales and service support in 31 countries and regions overseas, responding to customers’ current and future needs as soon as possible.

    ●Benchmark service:

    Follow-up call after each visit; video tutorials + telephone guidance on parts replacement and equipment maintenance; free follow-up month in December every year. We continue to collect user suggestions, continuously update and iterate the software, improve user production quality and efficiency, and provide lifelong maintenance.

×

This site uses cookies to improve your online experience, allow you to share content on social media, measure traffic to this website and display customised ads based on your browsing activity.