ZM30-M Online Multi-tool PCBA Splitter

The ZM30-M is a manual V-groove PCBA depaneling machine that combines a sliding upper circular blade with a lower straight blade for controlled linear separation.

Adjustable Circular Blade Travel Speed: Manually adjust the circular blade travel speed to suit different cutting requirements.
Adjustable Upper-to-Lower Blade Gap: Precisely adjust the blade gap according to V-groove depth and blade condition.
PCB Remains Stationary During Cutting: The PCB stays in position while the circular blade travels across the cutting line, reducing unnecessary board movement.

Send us your PCBA dimensions, board thickness, V-groove position and component layout to get a ZM30-M application evaluation and quotation.

Get A Quote

Details

Product Details

Overview

The ZM30-M uses an upper circular blade and lower straight blade cutting structure. The upper circular blade travels along the preset V-groove while the lower blade supports the cutting line to complete straight PCBA separation.

The manually controlled sliding mechanism gives the operator direct control over the cutting movement, making the machine suitable for V-groove panels that require controlled manual depaneling.

Core Advantages

ZM30-M low-stress V-groove PCBA depaneling

Low-Stress Depaneling, Reduced Solder-Joint Cracking Risk

The circular blade separates the PCB along the V-groove with low mechanical stress, helping reduce solder-joint cracking and board damage caused by bending or breaking the panel.

Upper Circular Blade Safety Guard

A protective guard covers the upper circular blade to reduce the risk of accidental finger contact during manual depaneling.

Application

The ZM30-M is designed for straight-line separation of PCB and PCBA panels with pre-scored V-grooves.

It can also be evaluated for panel designs where components extend across the V-groove area, making it useful for PCBA layouts that are difficult to separate by simply breaking the panel.

Application suitability should be confirmed according to board dimensions, V-groove depth, component layout and cutting position.

ZM30-M V-Groove PCBA Depaneling Machine FAQ

1. Does the PCB need to move during cutting?

No. The PCB remains in the working position while the circular blade travels along the cutting line.

2. Can ZM30-M process panels with components crossing the V-groove?

It can be evaluated for PCBA panels where components extend across the V-groove. Suitability depends on the actual component position and board structure.

3. Can the worktable height be adjusted?

Yes. The lifting platform can be adjusted so that the PCB is properly positioned relative to the cutting blades before depaneling.

4. How is the V-groove aligned before cutting?

The V-CUT groove is aligned with the lower straight blade before the sliding cutting motion begins.

5. How is the cutting movement controlled?

The operator manually moves the sliding cutting mechanism using the handle, providing direct control over the cutting process.

6. What information should I provide for a quotation?

Please provide the PCBA dimensions, board thickness, V-groove position and depth, component layout, cutting position and production requirements.

Why Choose SEPRAYS?

From daily operation to overseas support, SEPRAYS provides practical technical services to help customers use and maintain their PCB depaneling equipment more efficiently.

SEPRAYS operation and maintenance training

Operation and Maintenance Training

Helps production teams master machine operation to improve efficiency

SEPRAYS remote technical support

Remote Technical Support

Provides efficient technical coordination and problem-solving capabilities

SEPRAYS 24/7 service support

24/7 Service

SEPRAYS 24/7 service support ensures rapid response to requests

SEPRAYS regular overseas technical visits

Regular Overseas Visits

Regular overseas visits to facilitate face-to-face technical exchanges

Contact SEPRAYS

Looking for a manual depaneling solution for V-groove PCB / PCBA panels or boards with challenging component layouts?

Send us your PCB or PCBA drawing, board dimensions, thickness, V-groove details, component layout and production requirements, and SEPRAYS will help evaluate whether the ZM30-M is suitable for your project.

E-Mail:
millie@seprays.com

Address:
5th Floor, B2 Building Research Center Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, Guangdong Province, China

Request a Quote · Get Product Specifications · Discuss Your PCB Depaneling Project

Parameter

Technical Specifications

Parameters

ZM30-M
Machine Dimensions

820 × 390 × 360 mm
Net Weight

60 kg
Upper Circular Blade Diameter

125 mm
Lower Straight Blade Length

360 mm

Note: Products are subject to continuous optimization; specifications may be adjusted without prior notice. And we support customized requirements.

What services do you provide?

We provide one-stop automated PCB depaneling solutions: laser, routing, punching and V-CUT.

Can your machines handle different thicknesses of PCBs?

Yes, our machines are designed to handle various PCB thicknesses. We can provide customization and options to ensure smooth processing of both rigid and flex boards.

What type of training do you provide for your machines?

We provide comprehensive on-site training, covering machine operation, maintenance, and troubleshooting. We also offer ongoing technical support via phone and email.

What after-sales services can you provide?

●Exclusive service:

We will give users feedback within 10 minutes on any problems they encounter when using the device and establish a 1V1 exclusive after-sales service group for users.

●Remote service:

Provide users with a 7*24H hotline based on feedback on fault information, analyze, locate, and solve the fault through remote telephone support,remote login, and other methods.

●On-site service:

Arrive at the work site within 8 hours and solve the problem within 1 working day. 2-4 days of training on equipment safety operation and application.Any breach of contract will be handled by the contract provisions.

●Service locations:

We have sales and service support in 31 countries and regions overseas, responding to customers’ current and future needs as soon as possible.

●Benchmark service:

Follow-up call after each visit; video tutorials + telephone guidance on parts replacement and equipment maintenance; free follow-up month in December every year. We continue to collect user suggestions, continuously update and iterate the software, improve user production quality and efficiency, and provide lifelong maintenance.

This site uses cookies to improve your online experience, allow you to share content on social media, measure traffic to this website and display customised ads based on your browsing activity.