PCB Depaneling Machine Maintenance Guide: Daily, Weekly, and Monthly Procedures

After purchasing a PCB depaneling machine, businesses can benefit from increased production efficiency, improved cutting accuracy, and enhanced safety performance. In an era of rising labor costs, these machines also help reduce manual labor expenses, allowing for a quick return on investment. However, proper maintenance is crucial and should be performed by designated personnel. Seprays presents this guide on the daily, weekly, and monthly maintenance of PCB depaneling machines.

Daily Maintenance Tasks

1. Bottom Control Box Maintenance:

Check the electrical control box for any fallen debris. Clean promptly if necessary. Perform this check daily.

2. Front & Rear Main Panel Maintenance:

Wipe the exterior surfaces of the main unit’s front and rear panels daily to remove dust and oil stains.

3. XYZ Motor Wiring & Limit Sensor Maintenance:

Clean the external surfaces of sensors daily to remove accumulated dust and oil.

4. Main Unit Base Plate Maintenance:

Remove any fallen components immediately and replace them if necessary.

5. Filter-Regulator-Lubricator (FRL) Unit Maintenance:

Check the filter bowl for water accumulation daily. If water is present, press the yellow drain valve to release it.

Also, check the oil level in the lubricator bowl to ensure it is sufficient.

6. Spindle Maintenance:

Wipe and clean the spindle daily.

7. Dust Collector Maintenance:

After the machine stops operation, wipe down and clean the dust collector daily.

Weekly Maintenance Tasks

1. Bottom Control Box Maintenance:

Check for and clear any debris inside the electrical control box.

2. Front & Rear Main Panel Maintenance:

Check internal connectors for looseness and re-tighten them.

3. XYZ Motor Wiring, Home & Limit Sensor Maintenance:

Inspect connection wires for looseness or poor contact. Re-secure them.

4. XYZ Axis Guide Rails & Ball Screws Maintenance:

Apply a thin layer of oil to the surfaces of the XY-axis ball screws and linear guide rails, and the Z-axis sliding surfaces.

5. Moving Connection Cables:

Check connectors for looseness and re-seat them properly. Ensure cables are not rubbing against obstructions and remove any if found. Inspect cables for oil contamination and clean them.

Monthly Maintenance Tasks

1. Bottom Control Box Maintenance:

Check internal connectors within the electrical control box for looseness and re-tighten them.

2. XYZ Axis Guide Rails & Ball Screws Maintenance:

Inject specific ball screw grease into the grease fittings on the XYZ-axis guide rails.

3. XYZ Motor Coupler Maintenance:

(Note: Specific monthly tasks for motor couplers should be performed as per the machine’s detailed manual).

4. Machine Support Feet & Anti-Loose Screws Maintenance:

Check the anti-loosening screws on the machine’s support feet for tightness. Re-tighten if necessary.

The above guidelines cover the essential maintenance注意事项 and solutions for PCB depaneling machines. We hope this information proves helpful.

Seprays: Specializing in PCB Depaneling Solutions

Seprays not only provides various PCB depaneling process solutions but also offers custom jigs, fixtures, and molds based on product requirements, maximizing production efficiency and ensuring stable quality output.

Choosing Seprays gives you access to:

Flexible multi-process depaneling solutions

Customized jig and mold support

High-precision machining equipment and strict quality control

Fast delivery times and stable mass-production capabilities

For more information on PCB depaneling, please contact Seprays (email: jimmy@seprays.com). We are committed to providing you with the most suitable depaneling solution.